Veneer crossfeed splicing Fisher+Rueckle FZR-21 +stacking+lifting

Machines connected in one line (all three machines are only sold together). Still in production!

1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-21, year 2009
2. Direct Stacking Device Fisher+Rueckle DAR-25, year 2009
3. Scissor lifting table 500 kg

Veneer Crossfeed Splicer FURNIMASTER FZR-21

TECHNICAL DOCUMENTATION (full pdf on request)

Veneer strip length (grain direction) 350 - 2100 mm

Veneer strip width (cross grain) 50 - 500 mm

Veneer strip thickness 0,3 - 1,5 mm

Moisture content, approx. 8 - 12%

Maximum nominal output / machine cycles 30 cycles/min.

Average production speed 17 - 20 cycles/min. (Power data based on an average veneer face width of 100 mm, cross grain)

Effective length of heating zone 2164 mm

Throughput speed 33 m/min.

Joint counter / panel automatic 33cST-50° C

Oil capacity 70 l hydraulic oil/

Connection data (Basic machine)

Connection power 19 kW

Compressed air 6 bar

Power consumption

Electric energy 6,2 kWh

Compressed air 15 NL/min.

Dimensions (Basic machine) 3500 mm L x 1500 mm W x 1530 mm H

Working table height 930 mm (+50/-0 mm)

Weight 2500 kg

Stacking Device DAR.25

Veneer sheet length (grain direction) 600 * - 2100 mm

Veneer sheet width (cross direction) 500 * - 2500 mm

Max. stack width for unloading to

- right hand side 2500 mm

- left hand side 2500 mm

- rear side 2100 mm

Stacking height max. 500 mm

Connection power from FZR-21

Weight 1000 kg

LIFTING TABLE 500 kg

Measurements: 1500 mm L x 800 mm W

Weight 215 kg